Specifications

PROPRIETARY DATA: This document contains proprietary data of ABB Inc. No disclosure, distribution (electronic or otherwise),
or other means of dissemination may be made without written permission.
3BUS 208 000 R1301198 Replacement Procedures
Seal Belt
Use these procedures to replace the Seal Belt. See Figure 10-6 through Figure 10-8.
Exercise care when working with toothed belt and
toothed gear equipment. Do not wear ties or loose
clothing while working near equipment.
The Scanning Platform design allows replacement of this
item while the customer’s process is running. Exercise
caution to ensure that the seal belt is kept clear of the
process while being removed and replaced.
1. Loosen the seal belt clamp at the drive end.
Figure 10-6 Seal Belt Clamp and Adjustment Bolts
Seal Belt
Seal Belt Clamp
Adjustments
Seal Belt Clamp