Specifications

PROPRIETARY DATA: This document contains proprietary data of ABB Inc. No disclosure, distribution (electronic or otherwise),
or other means of dissemination may be made without written permission.
3BUS 208 000 R1301 177Maintenance Procedures
Inspecting the Drive System
The drive system consists of several belts that must be checked periodically for
proper tension and damage or defects. Complete the following procedures to
perform the drive checks.
Figure 9-1 Scanning Platform Lockout Switch Location
MOTOR ONLY
When performing any maintenance operation in the
carriages, always lock out the drive motor power
using the lock-out switch at the drive end column.
Refer to Figure 9-1.
Lock Out
Switch
A
B
B