Specifications

PROPRIETARY DATA: This document contains proprietary data of ABB Inc. No disclosure, distribution (electronic or otherwise),
or other means of dissemination may be made without written permission.
3BUS 208 000 R1301 171Startup Options
Automatic Startup
This method of startup will automatically restart the Scanning Platform MPRC
board in the case of a power reset or a manual reset request.
1. Place the START MODE switch on the MPRC front panel to the Short Diag
position (middle).
2. Either press the RESET switch on the MPRC front panel, or type reset on the
console keyboard (Scanning Platform window open).
3. The system will proceed with the startup and loading activity after about a 15-
second delay for diagnostic checks.
4. In less than a minute, the console should display the startup completion banner
which gives the download instructions from the Host computer. Execute the
PMMRLD command as directed by the Host computer.
5. The Host computer download activity will result in three messages:
pmmFrame01: HOST TO AMS DOWNLOAD IN PROGRESS.
pmmFrame01: HOST TO AMS DOWNLOAD COMPLETED.
pmmFrame01: HOST COMMUNICATIONS ESTABLISHED.
If download activity is not started, the console will eventually respond with:
pmmFrame01: HOST COMMUNICATIONS TIMEOUT.