Specifications

PROPRIETARY DATA: This document contains proprietary data of ABB Inc. No disclosure, distribution (electronic or otherwise),
or other means of dissemination may be made without written permission.
3BUS 208 000 R1301168 Control Panel Operation
Make certain the sensor heads are properly aligned
before re–engaging the clutch. Aligning the sensor
heads is mandatory to assure the radiation beam is
directed to its proper target.
In Local/Head Split mode, all communications with the Host computer are disabled,
and the Scanning Platform drive mechanism is disengaged.
The Scanning Platform enters Local/Head Split mode when the drive clutch is
disengaged.
Make sure the sensor heads can be separated by manually moving the bottom head.
Since the drive mechanism is disabled in Local/Head Split mode, the bottom sensor
head package can only be positioned by hand.