Specifications

PROPRIETARY DATA: This document contains proprietary data of ABB Inc. No disclosure, distribution (electronic or otherwise),
or other means of dissemination may be made without written permission.
3BUS 208 000 R1301 167Control Panel Operation
Head Split Switches
To gain access to the sensors mounted in the Scanning Platform head package, a
head split switch is located in each end column, as shown in Figure 7-2. The switch,
when activated, disengages the motor drive clutch and allows the top and bottom
sensor heads to be separated.
Figure 7-2 Locations of the Head Split Switches
When the sensor heads are split, the Scanning Platform is placed in Local mode,
and the sensor heads can only be moved by hand.
Drive End Idler End
Head
Split
Switch