Specifications

PROPRIETARY DATA: This document contains proprietary data of ABB Inc. No disclosure, distribution (electronic or otherwise),
or other means of dissemination may be made without written permission.
3BUS 208 000 R1301160 Control Panel Operation
Control Panel Description
The control panel consists of a covered key pad with 12 keys and two sensor shutter
indicator lights. A control panel is located on each end column of the Scanning
Platform. Refer to the control panel in Figure 7-1.
Figure 7-1 Scanning Platform Control Panel
When a control panel push button has been pressed, the request is acknowledged
by a small LED located in the upper left corner of the button, as shown in
Figure 7-1. For some control panel push buttons, the LED will remain on while the
push button is being pressed or while a function is being performed. For other
control panel push buttons, the LED will remain on until another push button has
been pressed, placing the Scanning Platform in another mode.
Shutter Open
Indicator
On Sheet Enable
Remote
Jog Forward
Sample Check
Maintenance
Set Forward Limit
Shutter Closed
Indicator
Off Sheet
Local
Jog Reverse
Calibrate Sample
Clean Standardize
Set Reverse Limit
LED located on
each push button
RF
RF
R