Specifications

PROPRIETARY DATA: This document contains proprietary data of ABB Inc. No disclosure, distribution (electronic or otherwise),
or other means of dissemination may be made without written permission.
3BUS 208 000 R1301124 Measurement Setup
Air Column Measurement
(Smart Basis Weight Sensor Only)
Air column measurement constants are changed using the Air Column Sensor
Health Report in a manner similar to the way Basis Weight sensor constants are
changed (see Figure 6-5 and Figure 6-6). There are five air column measurement
sensor constants, KZ0, KZ1, KZ2, KZ3, and gap offset. These constants are shown
as K0, K1, K2, and K3 on the screen. Record the constants in Table 6-17.
Figure 6-6 NT Workstation Air Column Health Report - Setup
Table 6-17 Air Column Measurement Constants
Head Constant
Value
(Enter values from the Calibration Report)
KZ0
KZ1
KZ2
KZ3
gap offset