Specifications

PROPRIETARY DATA: This document contains proprietary data of ABB Inc. No disclosure, distribution (electronic or otherwise),
or other means of dissemination may be made without written permission.
3BUS 208 000 R1301112 Measurement Setup
Operation of NT Workstation Health Reports
Note: If you are using the DOS/DESQview version of the Service
Workstation, you need Version K of this manual.
To activate the Health Reports, double click the Health Report icon (Internet
Explorer 5). The first page to come up will be the Service Workstation Links page.
This pages serves as an access point to any of the Smart Platforms connected to the
QCS LAN.
Figure 6-1 Menu Page with Links to Machines and Frames
When a particular Scanning Platform has been selected, the Frame Health Report
Overview for that frame, along with a header panel and a footer (color bars) appear
as shown in Figure 6-2. The header panel and color bars are always in view regardless
of which sensor or frame page is selected.
The header panel provides the following information and control:
• Customer name, machine number, and frame number/designation
• Scanning Platform system release level
• Current date and time
• Current status of the head command request. In workstation control, these are
request buttons.
• Status of End Column Control and selection of Host or Workstation control.
• Current shutter status
• In Workstation control, selection of Clean STDZ or APC Collection.