Specifications

PROPRIETARY DATA: This document contains proprietary data of ABB Inc. No disclosure, distribution (electronic or otherwise),
or other means of dissemination may be made without written permission.
3BUS 208 000 R1301 109Measurement Setup
OptiPak Sensor Setup
Table 6-3 OptiPak Sensor Setup
Ash Sensor Setup
Table 6-4 Ash Sensor Setup
Gloss Sensor Setup
Table 6-5 Gloss Sensor Setup
Procedure Refer To
Align the Sensor Heads OptiPak Sensor Manual,
3BUS 208 121 RXX01
Air Pressure Verification
Calibration of the Head Constants page 122
Set the Standardize Limits page 132
Verify the Sensor Function page 146
Set Up the Air Profile Compensation page 152
Procedure Refer To
Align the Sensor Heads page 44
Set up the Temperature /Air Flow page 115
Verify Source High Voltage Supply
Power–up and Adjustment
For STLXR3, refer to Smart Ash Sensor
Manual, 3BUS 208 128 RXX01
For TLXR3, refer to 2–Component and
3–Component Ash Sensors Manual,
3BUS 208 120 RXX01
Enter the Head Constants page 122
Set the Standardize Limits page 132
Verify the Sensor Function page 146
Setup Default Compensation page 156
Procedure Refer To
Align the Sensor Heads Gloss Sensor Manual,
3BUS 208 122 RXX01
Adjust the Air Wipes
Filter Regulator Assembly
Air Supply Quality Verification
Enter the Head Constants page 122
Set the Standardize Limits page 132
Verify the Sensor Function page 146
Set up the Air Profile Compensation page 152