Specifications

PROPRIETARY DATA: This document contains proprietary data of ABB Inc. No disclosure, distribution (electronic or otherwise),
or other means of dissemination may be made without written permission.
3BUS 208 000 R1301104 Platform Tuning
Operation Overview
When the head is moved off-sheet, a timer is started. When the time accumulation
equals that of the offSheetTime value, the system will set the stdzDelayRequired
flag. If a DIRT standardize request then comes from the host, the standardize request
will be so noted in the stdzRequested flag, but the actual standardize procedure
will be delayed until on-sheet has been requested and the head has been over the
sheet for at least onSheetTime seconds. Note that a single point request will start
the on-sheet timer, but the standardize will not occur until the mode changes back
to scan or off-sheet.