Specifications

PX-7 Owners Manual 255
Arpeggiator/Beats Menu
Pattern Step Number
Bank 0 = User Patterns
Bank 1 = Factory Patterns
Bank 2 = Factory Patterns
 To Select the Pattern to Edit
OO
OO
Before editing a Pattern,
select Master Arpeggiator (M) in
the main screen and set the
Arpeggiator to the Pattern you
are editing. This lets you hear
the Pattern as you edit it.
1. From the Edit User Pattern screen shown above, move the cursor to the
bottom line and select the pattern you want to edit. The Enter LED
begins flashing. Press Enter to move back to the Home position.
2. Select the next screen in the list, “User Pattern Edit”. This is where you
edit the currently selected pattern.
3. Move the cursor to the lower line of the display. For each step, you can
select: key, velocity, duration, and number of repeats.
Pattern Step Number You can set up to 32 steps for each arpeggiator pattern. This field selects
which step you will be editing from 1 to 32.
Key This parameter defines what happens during the current step. The Key
parameter can do one of five different operations. Following is a description
of each of the key functions and how to use them.
Key Offset
This parameter defines not the actual note of the arpeggiator playback, but
instead specifies the amount of offset, in semitones, from the original note
played. You can set a Key Offset from -48 to +48 for each step. For example,
if you play a “C” on the keyboard with the Key Offset amount for the first
step set to “+1,” the first step in the pattern will be “C#.”
EDIT USER PATTERN
01
1
DRUMnBASS 1
PTRN KEY VEL DUR RPT
S01 +0 ply 1/8 2
Pattern Step
number
Key offset Velocity Duration Repeat