User Guide

Orbit V2 Operation Manual6
CONNECTION INSTRUCTIONS
SETUP #2 STUDIO SETUP
MIDI In
In this setup, Orbit is controlled by MIDI messages received at the
MIDI In connector which have been routed by a MIDI switcher.
The MIDI switcher allows any MIDI controller such as a MIDI
keyboard, MIDI wind controller or a computer to be easily
connected.
MIDI Out
The MIDI Out jack is normally used to transmit program data to a
computer or other device.
Outputs
Orbit has three sets of programmable stereo outputs; Main, Sub 1,
and Sub 2. Specific Orbit presets (or MIDI channels) can be routed
to one of these stereo pairs in order to be further processed or
mixed separately.
Sub 2 Outputs Sub 1 Outputs Main Outputs
MIDI Out
MIDI Controller
(MIDI Keyboard, Sequencer, etc.)
MIDI In
Additional
MIDI
Devices
MIDI Switcher
MIDI
Out
Out In
Out
OutInIn
R - SUB2 - L R - SUB1 - L R - MAIN - L
MONO STEREO
THRUOUTIN
OUTPUTS
MIDI
Scotts Valley, California U.S.A.
100-250VAC 50/60 Hz ~
E-MU SYSTEMS, INC.
WARNING: TO REDUCE THE RISK OF FIRE
OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS PRODUCT TO RAIN OR MOISTURE.
MIDI
In
Computer