User guide

CLASS 5000 METER
3 62-0392-03
TABLE OF CONTENTS
Section 1.0 Introduction 4
Section 2.0 Internal Electronic Assemblies 5
Section 2.1 Main Power Board 6
Section 2.2 Display Board 7
Section 2.3 Input Board 8
Section 2.4 Pulse Type and Value 9
Section 3.0 Meter Technical Specifications 9
Section 4.0 Safety Label Definitions and Information 12
Section 5.0 Precautionary/Safety Information 12
Section 6.0 Meter Installation 13
Section 6.1 Mounting the Class 5000 Meter 13
Section 6.2 Main Power Board Connections 13
Section 6.3 Phasing of Line Voltage 15
Section 6.4 Current Sensor Installation & Wiring 16
Section 6.5 Main Power & Current Sensor Wiring Diagram 19
Section 6.6 Line Voltage/Current Sensor Diagnostics 19
Section 6.7 RS-485 Wiring 21
Section 6.8 RS-232 Communications 23
Section 6.9 Modem Wiring 25
Section 6.10 Modbus RTU Wiring 29
Section 6.11 BACnet Wiring 29
Section 6.12 Connecting Class 5000 Meters to USB Key using RS485 30
Section 6.13 Ethernet Communications 31
Section 7.0 Multiple-Load Monitoring 32
Section 8.0 Preventative/Scheduled Maintenance 33
Section 9.0 Lithium Battery Replacement 35
Section 10.0 Class 5000 Meter Features 35
Section 10.1 Display Board Push Buttons 36
Section 10.2 Normal Mode Display Screens 37
Section 10.3 How to Program the Display Screens 43
Section 11.0 Frequently Asked Questions 45
Section 12.0 Protocol Descriptions 55
Section 13.0 High Voltage Metering 58
Section 14.0 Meter Limited Warranty 59