Owner manual

Chapter 5 Configuring the PowerSmart Socket PQM
Configuring Communications
70 PowerSmart Socket Power Quality Meter
The following table lists available options
Parameter Options Default Description
SNTP Client Enabled NO, YES NO Enables operations of the SNTP
client
Polling interval, s 60-86400 s 600 s The time remaining requesting
time from the SNTP server
Primary SNTP Server IP
Address
192.36.143.151 The IP address of the primary
SNTP server
Secondary SNTP Server
IP Address
130.149.17.21 The IP address of a secondary
SNTP server in the event of
temporary unavailability of the
primary server.
The default SNTP server IP addresses belong to Stockholm
and Berlin university servers.
Setting-Up eXpertPower Client
Select Communication Setup from the Meter Setup menu,
and then click on the ExpertPower Client Setup tab.
The PowerSmart Socket PQM has an embedded
eXpertPower
TM
client that provides communications with the
eXpertPower
TM
server – the Cloud AMR services. Connections
to the eXpertPower
TM
server are handled on a periodic basis.
The following table lists available options. Refer to your
eXpertPower service provider for the correct eXpertPower
settings.
Parameter Options Default Description
XPW Server IP Address 207.232.60.18 The IP address of the
eXpertPower server