Manual

ManualsBrandsE-Mon ManualsAccessories for electricalE-PS-A-RTU-N

Chapter 3 Display O P E R A T I O N S

M E N U O P E R A T I O N S

PowerSmart+ Advanced Power Quality Meter 49

Label Parameter Options Description

Zero scale

0-999,999

The low engineering scale (in

primary units) for the analog input

corresponding to a lowest (zero)

input current (0 or 4 mA)

Full scale

0-999,999

The high engineering scale (in

primary units) for the analog input

corresponding to a highest input

current (1 or 20 mA)

dEc.P

Number of

decimal places

0-3 The number of decimal digits in a

fractional part of the scaled

engineering value

Analog Outputs Setup

Analog Outputs SetupAnalog Outputs Setup

Analog Outputs Setup

This entry appears only if the meter is ordered with optional analog outputs. For

more information on configuring analog inputs in your meter, see Programming

Analog Outputs in Chapter 4.

To enter the menu, select the “A.Ou.1” or “A.Ou.2” entry from the Main menu for the

AO1 and AO2 output respectively, and then press the ENTER button.

To change the analog output options:

Use the UP and DOWN arrow buttons to scroll to the desired parameter.

Press the SELECT button to activate the lower window.

Use the UP and DOWN arrow buttons to adjust the parameter value.

Press ENTER to confirm the new parameter setting, or press ESC to discard changes.

You are returned to the middle window to select another parameter, or store your new

settings and exit the menu.

To store new settings and exit the menu:

When the middle window is highlighted, press the ENTER button.

You return to the Main menu.

To exit the menu without saving your changes, press ESC.

The following table lists available analog output options. For a list of the available output

parameters and their scales, see Programming Analog Outputs in Chapter 4.

Label Parameter

Options Description

OutP Output

parameter

See Appendix B Selects the measured parameter to

be transmitted through the analog

output channel.

Lo Zero scale Low engineering scale (in primary

units) for the analog output

corresponding to a lowest (zero)

output current (0 or 4 mA)

Hi Full scale High engineering scale (in primary

units) for the analog output

corresponding to a highest output

current (1 or 20 mA)

A.Ou.

ESC

A.Ou.

rt.U1

OutP

A.Ou.