Manual

Chapter 4 Power S O F T W A R E
C O M T R A D E A N D P Q D I F
C O N V E R T E R S
124 PowerSmart+ Advanced Power Quality Meter
COMTRADE and PQDIF Converters
The COMTRADE and PQDIF file converters allow you to convert retrieved waveforms into
COMTRADE or PQDIF file format, and data log tables – into PQDIF format.
Manual Converting
Manual ConvertingManual Converting
Manual Converting
To manually convert your waveforms or a data log into COMTRADE or PQDIF format:
Click on the Export button on the Power Software toolbar.
Select the database and a waveform or data log table you want to export, and then click
Open.
Select a directory where you want to store your exported files, type a file name that
identifies your files, select a desired file output format, and then click on the Save button.
The PQDIF files are commonly recorded in compressed format. If you do not want your
files to be compressed, uncheck the Compress box before saving the file.
In COMTRADE format, each waveform event is recorded into a separate file. A
COMTRADE waveform file name contains a site name followed by an ID of the fault or
power quality event, which triggered the waveform record.
PQDIF file names contain a site name followed by a timestamp of the first event recorded
to the file, and may look like 12KVSUB_20040928T133038.pqd.