User Manual

ManualsBrandsE-Mon ManualsAccessories for electricalE-MM-RTU-D-N

Multi-Mon Multiple Circuit Energy Monitor

LIMITED WARRANTY

The manufacturer offers the customer a 24-month functional warranty on the instrument for

faulty workmanship or parts from date of dispatch from the distributor. In all cases, this

warranty is valid for 36 months from the date of production. This warranty is on a return to

factory basis.

This warranty is only applicable to Multi-Mon instruments using Multi-Mon current

transformers.

The manufacturer does not accept liability for any damage caused by instrument

malfunction. The manufacturer accepts no responsibility for the suitability of the instrument

to the application for which it was purchased.

Failure to install, set up or operate the instrument according to the instructions herein will

void the warranty.

Only a duly authorized representative of the manufacturer may open your instrument. The

unit should only be opened in a fully anti-static environment. Failure to do so may damage

the electronic components and will void the warranty.

The greatest care has been taken to manufacture and calibrate your instrument. However,

these instructions do not cover all possible contingencies that may arise during installation,

operation or maintenance, and all details and variations of this equipment are not covered

by these instructions.

For additional information regarding installation, operation or maintenance of this

instrument, contact the manufacturer or your local representative or distributor.

WARNING

WARNINGWARNING

WARNING

Read the instructions in this manual before performing installation and take note of the

Read the instructions in this manual before performing installation and take note of the Read the instructions in this manual before performing installation and take note of the

Read the instructions in this manual before performing installation and take note of the

following precautions:

following precautions:following precautions:

following precautions:

 Mult

MultMult

Multi

-Mon

MonMon

Mon is intended for measurements performed in building installations, relating to

is intended for measurements performed in building installations, relating to is intended for measurements performed in building installations, relating to

is intended for measurements performed in building installations, relating to

measurement category III (UL61010

measurement category III (UL61010measurement category III (UL61010

measurement category III (UL61010-

-1, 6.7.

1, 6.7.1, 6.7.

1, 6.7.4).

4).4).

4).

 Ensure that all incoming AC power

Ensure that all incoming AC powerEnsure that all incoming AC power

Ensure that all incoming AC power and other power source

and other power source and other power source

and other power sources are turned OFF before

s are turned OFF before s are turned OFF before

s are turned OFF before

performing any work on the instrument. Failure to do so may result in serious or even

performing any work on the instrument. Failure to do so may result in serious or even performing any work on the instrument. Failure to do so may result in serious or even

performing any work on the instrument. Failure to do so may result in serious or even

fatal injury and/or equipment damage.

fatal injury and/or equipment damage. fatal injury and/or equipment damage.

fatal injury and/or equipment damage.

 Before

BeforeBefore

Before

connectin

connectinconnectin

connecting the instrument to the power

g the instrument to the powerg the instrument to the power

g the instrument to the power source

source source

source, check the labels at the front of

, check the labels at the front of , check the labels at the front of

, check the labels at the front of

the instrument to ensure that your instrument is equipped with the appropriate rating

the instrument to ensure that your instrument is equipped with the appropriate rating the instrument to ensure that your instrument is equipped with the appropriate rating

the instrument to ensure that your instrument is equipped with the appropriate rating

input voltages and currents.

input voltages and currents.input voltages and currents.

input voltages and currents.

 Under

UnderUnder

Under

no circumstances should the instr

no circumstances should the instrno circumstances should the instr

no circumstances should the instrument be connected to

ument be connected toument be connected to

ument be connected to

a power

a powera power

a power

source

sourcesource

source

if it is damaged.

if it is damaged.if it is damaged.

if it is damaged.

 To prevent

To prevent To prevent

To prevent potential fire or shock hazard, do not expose the

potential fire or shock hazard, do not expose thepotential fire or shock hazard, do not expose the

potential fire or shock hazard, do not expose the

instrument to

instrument toinstrument to

instrument to

rain or

rain or rain or

rain or

moisture.

moisture.moisture.

moisture.

 While installing

While installing While installing

While installing Multi

MultiMulti

Multi-

-Mon CTs

Mon CTsMon CTs

Mon CTs to the

to the to the

to the secondary

secondary secondary

secondary of an external

of an external of an external

of an external third party

third party third party

third party cu

cucu

current

rrent rrent

rrent

transformer

transformertransformer

transformer, the external current transformer secondary output

, the external current transformer secondary output , the external current transformer secondary output

, the external current transformer secondary output must never be

must never bemust never be

must never be

allowed

allowed allowed

allowed

toto

bebe

open circuit when the primary is energized. An open circuit can cause high

open circuit when the primary is energized. An open circuit can cause high open circuit when the primary is energized. An open circuit can cause high

open circuit when the primary is energized. An open circuit can cause high

voltages, possibly resulting in equipment damage, fire and even

voltages, possibly resulting in equipment damage, fire and even voltages, possibly resulting in equipment damage, fire and even

voltages, possibly resulting in equipment damage, fire and even serious or fatal inj

serious or fatal injserious or fatal inj

serious or fatal injury

uryury

ury.

. .

Ensure that the current transformer wiring is secured using an external strain relief to

Ensure that the current transformer wiring is secured using an external strain relief to Ensure that the current transformer wiring is secured using an external strain relief to

Ensure that the current transformer wiring is secured using an external strain relief to

reduce mechanical strain on the screw terminals

reduce mechanical strain on the screw terminalsreduce mechanical strain on the screw terminals

reduce mechanical strain on the screw terminals, if necessary.

, if necessary., if necessary.

, if necessary.

 Only qualified personnel familiar with the instrument and its associated electrical

Only qualified personnel familiar with the instrument and its associated electricalOnly qualified personnel familiar with the instrument and its associated electrical

Only qualified personnel familiar with the instrument and its associated electrical

equipment must perform setup procedures

equipment must perform setup proceduresequipment must perform setup procedures

equipment must perform setup procedures.

 Do not open the instrument under any circumstances when it is

Do not open the instrument under any circumstances when it isDo not open the instrument under any circumstances when it is

Do not open the instrument under any circumstances when it is connected to a

connected to a connected to a

connected to a

power

powerpower

power source

source source

source.

 Do not use the instrument for primary protection functions where failure of the device

Do not use the instrument for primary protection functions where failure of the device Do not use the instrument for primary protection functions where failure of the device

Do not use the instrument for primary protection functions where failure of the device

can c

can ccan c

can cause fire, injury or death. The instrument can only be used for secondary

ause fire, injury or death. The instrument can only be used for secondary ause fire, injury or death. The instrument can only be used for secondary

ause fire, injury or death. The instrument can only be used for secondary

protection if needed.

protection if needed. protection if needed.

protection if needed.

Read this manual thoroughly before connecting the device to the current carrying circuits.

Read this manual thoroughly before connecting the device to the current carrying circuits. Read this manual thoroughly before connecting the device to the current carrying circuits.

Read this manual thoroughly before connecting the device to the current carrying circuits.

During operation of the device, hazardous voltages are present on in

During operation of the device, hazardous voltages are present on inDuring operation of the device, hazardous voltages are present on in

During operation of the device, hazardous voltages are present on input terminals

put terminalsput terminals

put terminals. Failure

. Failure . Failure

. Failure

to observe precautions can result in serious or even fatal injury or damage to equipment.

to observe precautions can result in serious or even fatal injury or damage to equipment.to observe precautions can result in serious or even fatal injury or damage to equipment.

to observe precautions can result in serious or even fatal injury or damage to equipment.

All trademarks are property of their respective owners.

August 2013