Owner's manual

DIN-MON™ SMART METER
9 62-0442—04
2.0 METER TECHNICAL SPECIFICATIONS
2.1 Ordering Information
Brand Class
Voltage
Current Rating (Amps) Enclosure Communication Protocol Current Sensor Type Phase Current Sensor Input Package Type
Example E D5 480 100 S 03 SPL 3 V3 KIT3
E-D5-480100-S03SPL3-V3KIT3
Brand E=E-Mon D-Mon
Class D2 = Din-Mon™ kWh Meter
D5 = Din-Mon™ Advanced kWh Meter
Voltage (Input) 120=120V (L-N)
208=120/208V, 127/220V (L-L)
480=277/480V (L-L)
600=347/600V (L-N)
400=220/380V, 230/400V, or 240/415V (L-N)
Current Rating
(Amps)
100-, 200-, 400-, 800-
Enclosure S=DIN Rail / Flat mount
Communication
Protocol
RTU=MODBUS RTU (only D2)
BAC=BACnet MS/TP (only D2)
EZ=EZ7 (only D2)
01=EZ7, EZ7 Ethernet
02=Modbus RTU, EZ7 Ethernet
03=BACnet MS/TP, EZ7 Ethernet
04=EZ7,Modbus TCP/IP
05=EZ7, BACnet IP
06=Modbus RTU, Modbus TCP/IP
12=EZ7/ LonWorks (TP/FT-10)
Current Sensor
Type
SPL=Split Core Sensors(100, 200, 400, 800) Amps
SCS=Solid Core Sensor (100, 200) Amps
Phase 1=Single Phase, 2=Two Phases, 3=Three Phases
Current Sensor
Input
V3=0.333V
C1=100mA
Package Type
Blank=No Current Sensor
KIT1=Include 1 Current Sensor,
KIT2=Include 2 Current Sensors,
KIT3=Include 3 Current Sensors