Owner's manual

DIN-MON™ SMART METER

61 62-0442—04

To clear single meter kWh/kVARh, select reset kW/kWh on the display menu of the

meter. This function will also reset external inputs. Jumper J6 must be closed.

Remove J6 when changes have been completed.

37 Analog Input Phase angle, phase B Degree Present Value R

38 Analog Input Phase angle, phase A Degree Present Value R

39 Analog Input Reserve A No units Present Value R

40 Analog Input Reserve B No units Present Value R

41 Analog Input Reserve C No units Present Value R

INSTANCE

BACNET

OBJECT DESCRIPTION R/W

Device ID Device Present value R

Device ID Device Object name R

Device ID Device Object type R

Device ID Device System status R/W

Device ID Device Vendor name R

Device ID Device Vendor identifier R

Device ID Device Model name R

Device ID Device Firmware revision R

Device ID Device Application software version R

Device ID Device Location R/W

Device ID Device Description R/W

Device ID Device Protocol version R

Device ID Device Protocol services supported R

Device ID Device Protocol object types supported R

Device ID Device Protocol revision R

Device ID Device Object list R

Device ID Device Max APDU length supported R

Device ID Device Segmentation supported R

Device ID Device Local time R

Device ID Device Local date R

Device ID Device APDU time out R/W

Device ID Device Number of APDU retries R/W

Device ID Device Device address binding R

INSTANCE

BACNET

OBJECT DESCRIPTION UNITS PROPERTY R/W