Owner's manual

DIN-MON™ SMART METER

49 62-0442—04

8.0 NORMAL OPERATING MODES

The Din-Mon

Meter is used to monitor electric power usage of individual loads after

the utility meter and store kW and kVAR data for automatic meter reading.

8.1 Startup Screens

When the meter starts up, the screen first displays the

meter name and firmware image type.

After approximately 4 seconds, the screen displays

misc. information such as active configurations, meter

configurations, phase, voltage, amperage, calibration

factors, serial number, Date/time and firmware

version.

Fig. 29. Din-Mon™ Meter

Screen Description Display

1 Startup screen 1

2 Startup screen 2

Firmware Code Firmware Type

M ModBus RTU and ModBus TCP/IP

B-IP BACnet IP on Ethernet, EZ7 on RS-485 only

B-MSTP BACnet MS/TP on RS-485, EZ7 on Ethernet only

L LonWorks TP/FT-10, EZ7 on RS-485 only

Protocol Code Active Protocol Selection

EZ7 EZ7

B-IP BACnet IP

B-MSTP BACnet MS/TP

LON LonWorks TP/FT-10

Din-Mon M

Starting Up...

121212r

9600 EZ7 EZ7

3P-208V-100A

0.994 0.99B 1.00

121212r 06.51.01