User manual

H980 Series 3G Router User Manual
59
Appendix: Software Upgrade Description
Upgrade tool description and operating instructions
H980 Series 3G Router is designed with the platform technology, whose software can
be upgraded with the development of the communication and network technology.
WEB upgrade:
H980 Series 3G Router supports the function of upgrading the firmware directly by
importing the upgrade file via the WEB configuration interface. Log in the WEB
configuration page by means of entering the router’s IP address (LAN port or WAN
port) in the browser’s address bar. Click System Tools -> Firmware Upgrade, to go to
the Web firmware upgrade interface. Click the Browse key to find the corresponding
upgrade file. Click the Save button to upgrade the firmware.
In the process of upgrade, don’t make any other operation to the Web configuration
page. Otherwise, the upgrade may fail, which may make the router fails. After the
upgrade, this Web page will prompt that the upgrade succeeds or fails. If upgrade fails,
you can repeat the above operations again to upgrade the firmware.
Note:
1. In the software upgrade process never cut off the power supply or disconnect the
communication between the PC and the router.