User manual

H980 Series 3G Router User Manual
50
3.3.7.2 Static route configuration
In the “Forward” main tab, click the “Static Route” sub-tab to set the static route
parameters and go to the following configuration interface:
Fig. 3.3.7.2-1: Static Route Configuration Interface
The configuration parameters include:
【View Route Table】: View the current system’s route table.
【Add】: Add new static routes.
【Refresh】: Refresh the information on the page.
To add the static route, click the “Add” button and go to the following configuration
interface:
Fig. 3.3.7.2-2: Static Route Configuration Interface
The static route’s configuration parameters include:
【Destination IP】: Configure the destination network address of this static route.
【Subnet Mask】: Configure the subnet mask of the destination address of this static
route.