User manual

H980 Series 3G Router User Manual

Fig. 3.3.7.1-4: DMZ Setting Interface

DMZ configuration parameters include:

【Outside Interface】

: Set the interface on which the DMZ function acts.

【Inside Address】

: Set the IP address of the host assigned by DMZ record.

3. NAT setting

To configure the NAT function, you need to go to the following configuration interface:

Fig. 3.3.7.1-5: NAT Setting Interface

NAT configuration parameters include:

【Name】: Set the name mapped by NAT port.

【Protocol】: Set the protocol mapped by NAT port.

【Outside Interface】: Select the interface on which NAT function acts.

【Outside Port】: Set the outside port number mapped by NAT port.

【Inside Address】: Set the IP address of LAN host mapped by NAT port.

【Inside Port】: Set the port number of LAN host mapped by NAT port.