User manual

H980 Series 3G Router User Manual

Fig. 3.3.7.1-2: NAT&DMZ Setting Interface

【Select】: Select which data forward rule to be added.

1. Route mode setting

Select the “Route Mode” option to go to the following configuration interface:

Fig. 3.3.7.1-3: NAT&DMZ Setting Interface

Route Mode configuration parameters include:

【Interface】:On selected interface, the source IP of packets pass through H980 Series

would not be replaced to H980 Series’s IP, the destination machine can see the source

IP directly.

Note:

Normally you may not need this option except for some certain application.

2. DMZ setting

Select the “DMZ” option to go to the following configuration interface: