User manual

H980 Series 3G Router User Manual
33
Fig. 3.3.3.2: Wireless configuration interface
【Wireless Status】: set whether wireless network function is enabled.
【Wireless Mode】: Right now could only work as a AP.
【Wireless Network Mode】: set which protocols will be use, Could select only use
802.11b or 802.11g.
【Wireless Network Name】: set the name of your WIFI network. It must be unique in
wireless network.
【wireless channel】: select the wireless channel. Select a proper wireless channel from
pull-down list and the router will broadcast upon selected channel.
【Wireless Broadcast Status】: set whether enable wireless broadcast. If disable
broadcast, you could not find the AP.
3.3.3.3 WIFI security configuration
Click “WIFI Security” sub-tab to set the security parameter, and enter the following
configuration interface:
Fig. 3.3.3.3: WIFI Basic
【Security Mode】: select security mode, to connect an AP, one must use the same
security mode as the AP.
【Encryption】: Choose which way of encryption to use..