User manual

H900 Series Cellular Router User Manual
Fig. 3.3.8.2: System Log Management Interface
The system log configuration parameters include:
【Local Log Status】: Set whether enable local log function: Enable/Disable.
【Remote Log Status】: Set whether enable remote log function: Enable/Disable. After
this function is enabled, the router will send the log information to the configured
remote PC.
【Remote IP】: Set the IP address of the remote server, generally the IP address of the
PC that receives the log information.
【Remote Port】: Set the port number of the remote server.
Not
For
e:
the success of remote log receive, the remote log server must be started.
3.3.8.3 System clock

In the “System Tools” main tab, click the “Clock” sub-tab to set the system’s clock
function. Time Synch. Type option is the method to synchronize the system time: NTP
and Manual.
Select the Manual to set the time manually.
Select the NTP to go to the following configuration interface: