User manual

H900 Series Cellular Router User Manual
The configuration parameters include:
【View Route Table】: View the current system’s route table.
【Add】: Add new static routes.
【Refresh】: Refresh the information on the page.
To add the static route, click the “Add” button and go to the following configuration
interface:
Fig. 3.3.7.2-2: Static Route Configuration Interface
The static route’s configuration parameters include:
【Destination IP】: Configure the destination network address of this static route.
【Subnet Mask】: Configure the subnet mask of the destination address of this static
route.
【Gateway】: Configure the next IP address of this static route, namely the port address
of the neighboring router.
【Interface】: Specify the interface on which the static route acts.
3.3.8 System tools

When you click the “System Tools” tab, the following sub-tabs appear on the page:
 Local Log
 System Log
 Clock
 Account
 Backup
 Firmware Upgrade
 System Reboot
Fig. 3.3.8: System Tools Tab