Instruction manual

- 42 -
5.4.3 SCHEDULE & ALARM RECORDING
For instances where a location needs to be recorded at a predetermined schedule, but also needs to
record in case of alarm triggers. Both schedule and alarm recording can be used in conjunction to
meet the requirement.
Any of the MODES within the schedule can be
configured to be run during the scheduled recording
time period. The illustration to the left has modified
MODE1 to record at 15 pictures per second. Please
verify that the USE for the camera necessary has been
set to ON.
ALARM recording has been configured to record at 15
pictures per second. Please verify that the USE for the
camera necessary has been set to ON.
The combination of both settings will allow the DVR to record continuously during the scheduled time
period, but will record whenever in case of an alarm trigger. At both instances, the DVR will record at
15 pictures per second for all channels.
5.4.4 SUMMARY OF COMBINATION
The following is the summary of possible combinations of recording modes.
RECORD MODE MENU
RECORD
CAMERA USE
ALARM
CAMERA USE
SCHEDULE
CAMERA USE
MOTION
Normal RECORD ON OFF OFF OFF
Motion RECORD ON OFF OFF ON
Alarm ALARM OFF ON OFF OFF
Schedule SCHEDULE OFF OFF ON OFF
Schedule Motion SCHEDULE OFF OFF ON ON
Normal and Alarm RECORD & ALARM ON ON OFF OFF
Motion and Alarm RECORD & ALARM ON ON OFF ON
Schedule and Alarm ALARM & SCHEDULE OFF ON ON OFF
Schedule Motion and Alarm ALARM & SCHEDULE OFF ON ON ON