Specifications

Communication

If you have established a connection and want to change the currently

active address of the E-517, proceed as follows:

1 Use the IFC command in the command entry facility of the

program, e.g. by sending IFC GPADR 7.

2 Close the connection.

3 Open the connection again with the address you just set with IFC

(in the example 7).

The currently active address can also be checked/set on the E-517 front

panel in the

COMMUNICATION display screen (p. 21). This screen can be

accessed by the

trackball (p. 22). The front panel setting corresponds with

the address setting available over the PC interface.