Specifications

Operation

All firmware updates can be made by running the Firmware Update Wizard

on the host computer, using the same communication interfaces as for

normal operation. The Firmware Update Wizard is available on the E-517

CD and can be installed as follows:

1 Insert the E-517 CD in your host PC.

2 If the Setup Wizard does not open automatically, start it from the

root directory of the CD with the

icon.

3 Follow the on-screen instructions, select "custom" installation and

then select the Firmware Update Wizard.

Figure 2: The Firmware Update Wizard Start Screen

In the Select PI controller window, select Auto detection and press the

Connect... button. The Firmware Update Wizard guides you through the

firmware update of your E-517 system.