Specifications

First Steps

Find details in

"Modes of Operation" (p. 23).

6 Optionally: Configure the PIMikroMove™ main window:

It is recommended to see the tab cards for axes, sensor and piezo

channels (see figure below). You can arrange them by dragging

them with the left mouse button pressed so that they become

docked e.g. to the bottom border of the window.

On the

Axes tab card, you can start axis motion (see step 7 below).

The channel tab cards show the current sensor and output voltage

values which are also visible on the main screen of the E-517

display.

Note:

With the E-517, the axis-to-channel assignment is fixed so that the

first motion axis ("A" by default) always is driven by the first piezo

channel and measured by the first sensor channel, the second axis

("B" by default) belongs to the second piezo channel and to the

second sensor channel, and the third axis ("C" by default) belongs

to the third piezo channel and to the third sensor channel. Each

line on the tab cards belongs to one axis or one channel of the

system respectively.