User`s manual
15
3 Device Installation
Please follow the steps listed below to install the device. Please refer to Figure 3-1 for reference.
z Please line up the installation holes of the bottom of the device to the installation holes in the
front part of the bracket. Then insert the screws to the holes to fasten the device on the
bracket.
z Dig four holes in the wall or the surface, and then input the expansion bolts to the holes and
secure.
z Put the four fixed holes of the bottom of the bracket to the four holes you just dug in the wall or
surface. Put the four fixed screws to the four holes of the bracket and then secure firmly.
Finally you can fix the bracket in the wall or surface.
Figure 3-1