HD IR Waterproof Fixed IP Camera User’s Manual Version 3.5.
Welcome Thank you for purchasing our IP camera! This user’s manual is designed to be a reference tool for your system.
Important Safeguards and Warnings 1．Electrical safety All installation and operation here should conform to your local electrical safety codes. The power shall conform to the requirement in the SELV (Safety Extra Low Voltage) and the Limited power source is rated 12V DC or 24V AC in the IEC60950-1. We assume no liability or responsibility for all the fires or electrical shock caused by improper handling or installation.
Please put the dustproof cap to protect the CCD (CMOS) component when you do not use the camera. 7. Accessories Be sure to use all the accessories recommended by manufacturer. Before installation, please open the package and check all the components are included. Contact your local retailer ASAP if something is broken in your package.
Table of Contents 1 General Introduction ..................................................................................................................1 1.1 Overview ........................................................................................................................1 1.2 Features.........................................................................................................................1 1.3 Specifications ............................................................
1 General Introduction 1.1 Overview This series IP camera integrates the traditional camera and network video technology. It adopts audio and video data collection, transmission together. It can connect to the network directly without any auxiliary device. This series IPC uses standard H.264 video compression technology and G.711a audio compression technology, which maximally guarantee the audio and video quality. It supports the IR night vision function.
z z z z z z Day/Night mode auto switch. Built-in IR light. Support IR night vision. Support picture parameter setup such as electronic shutter and gain setup. Backlight compensation: screen auto split to realize backlight compensation to adjust the bright. Support video watermark function to avoid vicious video modification. The enclosure conforms to the IP 66 protection. Has the waterproof function. 1.3 Specifications 1.3.
Audio Video Flip Snapshot Privacy Mask Video Setup Video Information Lens Lens Interface Audio Input Audio Output Bidirectional Talk Input Audio Bit Rate Audio Compression Standard Video Motion Detect Alarm Input Support mirror and flip function. Max 1f/s snapshot. File extension name is JPEG. Supports max 4 privacy mask zones Support parameter setup such as bright, contrast. Channel title, time title, motion detect, camera masking. 8~16mm @F1.6 C/CS.
Please refer to the following sheet for factory default setup information. Item Camera Brightness Default Setup IPC-HFW3300 Series 50 Contrast 50 Hue 50 Saturation 50 Gain Mode Auto Gain Limit 80 Exposure Mode Auto Auto Iris On Scene Mode Auto Day/night Mode Auto BLC Off Mirror Off Flip Off Conditions Setup Video bit stream Video Main Stream Bit stream type General Encode mode H.
Setup Item Bit Rate Type Snapshot Video Overlay Path Audio Main Stream Sub Stream Network TCP/IP Default Setup IPC-HFW3300 Series CBR Recomme nded Bit 192-1024Kb/S Bit Rate 1024 I Frame 50 Snapshot Type General Image Size 1080P（1920*1080） Quality 5 Interval 1s Privacy Mask Disable Channel Title Enable Time Title Enable IPC-HFW3110 Series 720P（1280*720） Snapshot Path C:\PictureDownload Record Path C:\RecordDownload Enable Enable Encode Mode G.
Setup Default Setup IPC-HFW3300 Series Item Enable ARP/Ping set device IP address service Enable Max Connectio n 10 TCP Port 37777 UDP Port 37778 HTTP Port 80 RTSP Port 554 HTTPs Port 443 Enable Disable Username N/A Password N/A Server Type Disable，CN99 DDNS Server IP none Server Port 80 Domain Name none User none Password **** Update Period 10 minutes IP Filter Trusted sites Disable SMIT(Email) SMTP Server none Port 25 Anonymity Disable User Name anonymity Pa
Setup Default Setup IPC-HFW3300 Series Item IPC-HFW3110 Series (Encryptio n mode) Title (Subject) IPC Message Attachmen t Enable Mail Receiver UPnP SNMP Bonjour Multicast QoS Vide o dete t Eve nt Motion Detect N/A Send Interval 0 second Email Test Disable，interval=60 minutes Enable UPnP Disable SNMP v1 Disable SNMP v2 Disable SNMP Port 161 Read Communit y public Write Communit y private Trap Address N/A Trap Port 162 SNMP v3 Disable Enable Enable Server Name “SN”.
Setup Item Sensitivity Video Masking Alarm Alarm Activation Record Channel Enable Record Delay 10 seconds Relay out Enable Alarm Delay 10 seconds Send Email Disable Snapshot Disable Enable Disable Record Channel Enable Record Delay 10 seconds Relay out Enable Record Delay 10 seconds Send Email Disable Snapshot Disable Enable Disable Relay in Alarm 1 Anti-dither 5 seconds Sensor Type NO Record Channel Enable Record Delay 10 seconds Relay out Enable Alarm Delay 10
Setup Default Setup IPC-HFW3300 Series Item Warning SD Card Error Disconnect ion IP Conflict Storage Storage FTP Record Control Capacity Limit 10% Relay out Enable Relay Delay 10 seconds out Send Email Disable Enable Disable Relay out Enable Relay Delay 10 seconds out Send email Disable Enable Disable Record Enable Record Delay 10 seconds Relay out Enable Relay Delay 10 seconds out Enable Disable Record Enable Record Delay 10 seconds Relay out Enable Relay Dela
Setup General System Device No Default Setup IPC-HFW3300 Series Device factory SN Language English Video Standard PAL Date Format Y-M-D Time Format 24H Time Zone GMT+08:00 System Time Sync DST Disable DST Type Week Start Time 00:00:00 of the first Sunday of the month End Time 00:00:00 of the second Monday of the month NTP Disable NTP Server clock.isc.
2 Structure 2.1 Multiple-function Combination Cable You can refer to the following figure for multiple-function combination cable information. See Figure 2-1. Figure 2-1 Please refer to the following sheet for detailed information. Port Name Function Connection Note VIDEO OUT Video port output BNC Output analog video signal. It can connect to the TV monitor to view the video. AUDIO IN Audio port input RCA Input audio signal. It can receive the analog audio signal from the pickup.
Port Name Function Connection Note Power port. Input DC 12V or AC 24V. Please note： Power port POWER input z Connect the DC5.5 round port to 2-pin converter cable （Provided） when you are using AC 24V series product. z The DC5.5 round port to 2-pin converter cable is not included in the accessories bag if you are using DC 12V series product. / Please refer to the follow sheet for detailed pin information Port Name SN Name Note 1 ALARM_COM Alarm output public port.
Figure 2-3 2.3 Bidirectional talk 2.3.1 Device-end to PC-end Device Connection Please connect the speaker or the pickup to the first audio input port in the device rear panel. Then connect the earphone or the sound box to the audio output port in the PC. Login the Web and then enable the corresponding channel real-time monitor. Listening Operation At the device end, speak via the speaker or the pickup, and then you can get the audio from the earphone or sound box at the pc-end. 2.3.
4) Set the WEB alarm output. The alarm output 01 is for the alarm output port of the device. It is the No.2 pin of the I/O cable. Figure 2-4 Please refer to the following figure for alarm input information. See Figure 2-5. Alarm input: When the input signal is idle or grounded, the device can collect the different statuses of the alarm input port. When the input signal is connected to the 5V or is idle, the device collects the logic “1”. When the input signal is grounded, the device collects the logic “0”.
3 Device Installation Please follow the steps listed below to install the device. Please refer to Figure 3-1 for reference. z Please line up the installation holes of the bottom of the device to the installation holes in the front part of the bracket. Then insert the screws to the holes to fasten the device on the bracket. z Dig four holes in the wall or the surface, and then input the expansion bolts to the holes and secure.
4 Quick Configuration Tool 4.1 Overview Quick configuration tool can search current IP address, modify IP address. At the same time, you can use it to upgrade the device. Please note the tool only applies to the IP addresses in the same segment. 4.2 Operation Double click the “ConfigTools.exe”icon, you can see an interface is shown as in Figure 4-1. In the device list interface, you can view device IP address, port number, subnet mask, default gateway, MAC address and etc.
Select the “Open Device Web” item; you can go to the corresponding web login interface. See Figure 4-3. Figure 4-3 If you want to modify the device IP address without logging in the device web interface, you can go to the configuration tool main interface to set. In the configuration tool search interface (Figure 4-1), please select a device IP address and then double click it to open the login interface. Or you can select an IP address and then click the Login button to go to the login interface.
Figure 4-5 18
5 Web Operation This series IPC product support the Web access and management via PC. Web includes several modules: monitor channel preview, system configuration, alarm and etc. 5.1 Network Connection Please follow the steps listed below for network connection. z Make sure the IPC has connected to the network properly. z Please set the IP address, subnet mask and gateway of the PC and the IPC respectively. IPC default IP address is 192.168.1.108. Subnet mask is 255.255.255.0. Gateway is 192.168.1.
Figure 5-2 If it is your first time to login in, system pops up warning information to ask you whether install control webrec.cab or not after you logged in for one minute. Please click OK button, system can automatically install the control. When system is upgrading, it can overwrite the previous Web too. If you can’t download the ActiveX file, please check whether you have installed the plug-in to disable the control download. Or you can lower the IE security level. See Figure 5-3.
Figure 5-4 Please refer to the Web Operation Manual included in the resource CD for detailed operation instruction.
6 FAQ Bug I can not boot up the device. Please click RESET button for at least five seconds to restore factory default setup. SD card times Do not set the SD card as the storage media to storage the schedule record file. It may damage the SD card duration. write I can not use the disk as the storage media. When disk information is shown as hibernation or capacity is 0, please format it first (Via Web). I can not upgrade the device via network.
Appendix Toxic or Hazardous Materials or Elements Component Name Toxic or Hazardous Materials or Elements Pb Hg Cd Cr VI PBB PBDE Circuit Board Component ○ ○ ○ ○ ○ ○ Device Construction Material ○ ○ ○ ○ ○ ○ Wire and Cable ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Packing Components Accessories O: Indicates that the concentration of the hazardous substance in all homogeneous materials in the parts is below the relevant threshold of the SJ/T11363-2006 standard.
