User`s manual

z Use the screwdriver to loosen the 3G card protection cap screw in the side panel, and then

remove the 3G card protection cap from the camera.

z Install the 3G card to the camera according to the proper installation position.

z Put the 3G card protection cap back.

z Use the screwdriver to fix the 3G card protection cap screw firmly to secure the 3G card

protection cap.

Figure 3-7

Figure 3-8

3.3.2 Remove

Please follow the steps listed below to remove 3G card. The interface is shown as Figure 3-9.

z Use the screwdriver to loosen the screw of 3G card protection cap in the rear panel.

Remove the cap from the camera.

z Follow the 3G card direction to remove the 3G card.

z Insert the 3G card protection cap.

z Use the screwdriver to fix the screw to secure the protection cap.

Figure 3-9