User`s manual

Figure 3-4

Figure 3-5

3.2.2 Remove

Please follow the steps listed below to remove SD card. The interface is shown as Figure 3-6.

z Use the screwdriver to loosen the screw of SD card protection cap in the rear panel.

Remove the cap from the camera.

z Follow the SD card direction to remove the SD card.

z Insert the SD card protection cap.

z Use the screwdriver to fix the screw to secure the protection cap.

Figure 3-6

3.3 3G Card

3.3.1 Installation

The 3G card installation is the same with the SD card.

Please follow the steps listed below to install 3G card. The interfaces are shown as Figure 3-7

and Figure 3-8.