User manual

-64- -65-
Figure 10-9 Record Storage
Step 2 Select the Hard Disk and click Modify enter the path setting interface show in Figure
10-10.
Figure 10-10 Hard Disk Setting
Step 3 Select Enable.
Step 4 Select the DiskGroupID.
Step 5 Input the UsableSpace.
Step 6 Click Modify to save the configuration and exit the interface.
Step 7 Select the file system.
Step 8 Click DiskFormat to format the disk. It will ask you all the information which has been
saved in Disk will be cleared, if yes, then it will start to format.
---- End
10.4.6 NVR Monitor
NVR Bear panel has a VGA output and a HDMI output interface. Default NVR will
output the VGA “VGA 1024×768” .User can adjust it as: VGA 1024×768、
VGA
1280×1024、
VGA 1600×1200、HDMI 720P、HDMI 1080P show in Figure 10-11.
Figure 10-11 Monitor configure
After change the configuration, the NVR will restart automatically.
eLineTechnology.com