User manual

User Manual of Network Camera
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
30
Steps:
1. Enter the Display Settings interface:
Configuration > Basic Configuration> Image> Display Settings
Or Configuration > Advanced Configuration> Image> Display Settings
2. Set the image parameters of the camera.
Figure 5-20 Display Settings
Descriptions of parameter configuration:
Exposure Time:
Speeds from 1/25 to 1/100,000 are selectable.
Iris Mode:
Auto and Manual are selectable.
Video Standard:
50 Hz and 60 Hz are selectable.
Day/Night Switch:
Day, Night and Auto are selectable.
Sensitivity
The Sensitivity of Day/Night switch can be set Low, Normal or High.
Switch Time:
Day/Night switch time is to adjust the time of day/night switch.
Mirror:
For the image mirror effect, Close, Center, Up/Down and Left/Right are selectable.
White Balance:
Auto white balance 1. /AWB1, Auto white balance 2. /AWB2 and Auto are selectable.
Digital Noise Reduction:
Close, Normal Mode and Expert Mode are selectable.
Noise Reduction Level:
From 0 to 100 are adjustable (0 stands for DNR closed and 100 stands for DNR