User manual

User Manual of Network Camera

the priority is.

3. Click to save the settings.

5.3.8 Configuring FTP Settings

Purpose:

The captured pictures of the camera can be uploaded to FTP server.

Steps:

1. Enter the FTP Settings interface:

Configuration >Advanced Configuration > Network > FTP

Figure 5-17 FTP Settings

2. Configure the FTP settings, including server address, port, user name, password,

directory and upload type.

Directory: In the Directory Structure field, you can select the root directory,

parent directory and child directory. When the parent directory is selected, you

have the option to use the Device Name, Device Number or Device IP for the

name of the directory; and when the Child Directory is selected, you can use the

Camera Name or Camera No. as the name of the directory.

Upload type: To enable uploading the captured picture to the FTP server.

3. Click to save the settings.

Note: If you want to upload the captured pictures to FTP server, you also have to

enable the continuous snapshot or event-triggered snapshot on Snapshot page.

For detailed information, please refer to the Section 5.6.8.