User manual

User Manual of Network Camera

(2) Click to save the settings.

Note: For the IP Server, You have to apply a static IP, subnet mask, gateway and

preferred DNS from the ISP. The Server Address should be entered with the

static IP address of the computer that runs the IP Server software.

Figure 5-13 IPServer Settings

5.3.5 Configuring SNMP Settings

Purpose:

You can use SNMP to get camera status and parameters related information.

Before you start:

Before setting the SNMP, please download the SNMP software and manage to

receive the camera information via SNMP port. By setting the Trap Address, the

camera can send the alarm event and exception messages to the surveillance center.

Note: The SNMP version you select should be the same as that of the SNMP

software.

Steps:

1. Enter the SNMP Settings interface:

Configuration > Advanced Configuration > Network > SNMP