User manual

User Manual of Network Camera

Figure 5-2 Time Settings

2. Select the Time Zone.

Select the Time Zone which is the closest to the camera’s location from the

drop-down menu.

Figure 5-3 Time Zone Settings

3. Configure the time synchronization by NTP Server or manually.

 Configuring Time Synchronization by NTP Server.

(1) Check the checkbox to enable the NTP function.

(2) Configure the following settings:

Server Address: IP address of NTP server.

NTP Port: Port of NTP server.

Interval: The time interval between the two synchronizing actions with NTP

server. It can be set from 1 to 10080 minutes.

Figure 5-4 Time Sync by NTP Server