User manual

User Manual of Network Camera

when an event takes place.

For the defined preset, you can call it at any time to the desired preset scene.

In the PTZ control panel, select a defined preset from the list and click to call the

preset.

Figure 4-5 Calling a Preset

 Linking to Alarm:

The preset can also be linked to the alarm input when there is an alarm event

occurring.

Figure 4-6 PTZ Linking

Please refer to Section 5.6.4 for the PTZ Linkage settings.

4.5 Configuring Live View Parameters

Purpose:

You can select the stream type and adjust the image size on the live view page.

Steps:

1. Click or tab under the menu bar of the live view

interface to select the stream type as main stream or sub-stream for live viewing.

2. Click each tab to set the image size to 4:3, 16:9, original or

auto.

Note: Please refer to Section 5.4.1 Configuring Video Settings for more detailed

settings about video parameters.