Specifications

C2983M-A (12/10) 7

6. Position the camera as needed:

a. View the camera image using the service port.

b. Manually rotate and tilt the camera module to position the camera. Do not over-rotate the

module.

Figure 6. Adjusting the Pan and Tilt

7. Adjust the field of view:

a. Loosen the zoom locking screw.

b. Turn the zoom adjustment ring clockwise or counterclockwise to adjust the field of view.

c. Tighten the zoom locking screw.

8. Focus the lens:

a. View the camera image using the service port or a Web browser.

b. Manually adjust the zoom and focus of the lens to the desired field of view.

c. The focus can be adjusted further using the settings in the Web interface.

WARNING: Excessively turning the module in one direction could result in damage to the wiring.

Pan 355°

Rotate 120°

Tilt 164°