Specifications

4 C2983M-A (12/10)

NOTES:

• Pelco recommends connecting the camera to a network that uses a Dynamic Host Configuration

Protocol (DHCP) server to address devices.

• Do not use a network hub when configuring the network settings for the camera.

• To ensure secure access to the network camera, place the camera behind a firewall when it is

connected to a network.

RJ-45 Network Port: Connects the camera to the IP network. Also supplies power to the camera

through the network using PoE.

Accessory Port: For use with compatible Pelco accessories.

Audio Line-In and Line-Out: Supplies line-in and line-out audio connections from a user-supplied

device. Audio functionality is only available for IM10-E and IM10-V Series models, and it can be

enabled or disabled using the Web browser.

Microphone: Supplies built-in, line-in audio to a PC. Microphone is only available for IM10-V Series

models, and it can be enabled or disabled using the Web browser.

Reset Button (R): Reboots the camera or restores the camera’s factory default settings. This button

is recessed. Using a small tool, such as a paper clip, press and release the reset button once to

reboot the camera. Press and hold the reset button for 10 seconds to restore the camera to the

factory default settings.

NOTE: The lower dome must be removed to access this button.

NTSC/PAL Button (V): Toggles the service port between NTSC and PAL formats. This button is

recessed. Using a small tool, such as a paper clip, press and release the NTSC/PAL button to toggle

between NTSC and PAL formats when using the service port. The default setting is NTSC.

NOTE: The lower dome must be removed to access this button

Service Port: Outputs analog video. Use this port at the installation site to set up the field of view

and to focus the camera. When a service cable is connected to the camera, video to the IP stream is

disabled.

Zoom Locking Screw: Sets the camera’s field of view.

Manual Focus Adjustment: Manually adjusts the focus of the camera.

~í

IMAGE UP Mark: Displays the position of the camera.