Installation Instructions

3
Sl-136 (9•06)
• Read instructions thoroughly before attempting installation. • DO NOT remove protective liners from adhesive
strips on back side of Center, Filler or Corner Panels until final installation. • Package should be stored at room
temperature (68°F-min.) for at least twenty-four (24) hours prior to installation. • Turn off water supply to bathtub —
Remove existing control valve handle(s) cover plates and filler spout, if shower head is mounted less than 58” from
top of bathtub — it must be removed.
NOTE: Center PaneI or Corner Panel may be installed first, installing Center Panel requires measuring the
bathtub backwall to establish the centerline, then position Center Panel accordingly. Filler Panels are installed last,
since they overlap both the Center and Corner Panels. • Trial fit all five (5) parts before applying construction
adhesive or drilling any mounting holes.
2
Sl-136 (9•06)
IMPORTANT: