Technical Specifications

E.L. Mustee & Sons, Inc.
5431 West 164th St.
Brook Park, OH 44142
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Web: www.mustee.com
Meet the quality standard in shower floors…
DURABASE
®
… exclusively from
E.L. Mustee & Sons, Inc.
For decades, homeowners and builders have
made DURABASE
®
fiberglass shower floors
their choice because of great design features,
quality construction and installation ease.
Available in all popular square and rectangular
sizes, DURABASE
®
shower floors can be
used with Mustee DURAWALL
®
shower
wall system, tile or other wall treatment to
create a beautiful shower space that will
complement any décor.
Features:
High-strength, one-piece, compression-molded fiberglass construction.
■■■
Structural design creates strength, rigidity and a long service life.
■■■
Molded drain with seal and removable strainer for 2" (Sch. 40) ABS, PVC or iron DWV
■■■
sanitary pipe.
Mold/mildew/stain-resistant semi-gloss surface finish.
■■■
Slip-resistant Starburst
■■■
®
floor finish.
Fits Mustee shower wall systems, tile and other wall treatments.
■■■
STYLEMATE
■■■
®
enclosures are available to create a glamorous finishing touch.
Code Accepted: DURABASE
®
Shower Floors meet or exceed performance requirements:
American National Standards Institute (ANSI)–Specification Z 124.1.2
■■■
IAPMO
■■■
®
Listed
Warnock Hersey
■■■
®
Listed– CSA test standards: Shower Floor –#B45.0 and #B45.5
American Society of Testing and Material (ASTM)–D 635, E 84 and E 162
■■■
DURABASE
®
Fiberglass Shower Floors
Square and Rectangular
General: Furnish and install as shown on plans, DURABASE
®
Shower Floor model ______, as
manufactured by E.L. Mustee & Sons, Inc. Floor to be one-piece, molded fiberglass, made with
matched metal molds. Surface to be slip-resistant Starburst
®
design that does not interfere with the
flow of water. Size ____" x ____". Shoulder will be no less than 3" high or less than 1" wide. Tiling
flange will extend not less than 1" higher than the threshold which provides an integral molded water
barrier. Threshold will be not less than 4
1
/
2
" high. Molded-in drain and drain seal for installation of 2" iron
DWV (Sch. 40) PVC or ABS sanitary drain pipe. Removable strainer. Shall meet ANSI Specification
Z 124.1.2. Color _____ (White, Bone, Biscuit).
Plan View
A
B
C
D
THRESHOLD
Specifications
Optional Drain Seals and Drain
– Ordered separately
Part No. Description
32.404 Drain Seal for 2" copper pipe
32.405 Drain Seal for 1
1
/
2
" ABS/PVC pipe
60.300A Drain Kit—White, Fits 3060L & 3060R
60.300ABN Drain Kit—Bone, Fits 3060L & 3060R
42.317A Drain—PVC with seal for 2" iron,
PVC or ABS pipe
SQUARE—single threshold
Nom. Size Model Color A B C D
32" x 32" 3232M White, Bone 32" 32" 16" 16"
34" x 34" 3434M White 34" 34" 17" 17"
36" x 36" 3636M White, Bone, Biscuit 36" 36" 18" 18"
42" x 42" 4242M White, Bone 42" 42" 21" 21"
RECTANGULAR—single threshold
Nom. Size Model Color A B C D
30" x 60" 3060L* White 60" 30" 15" 30"
30" x 60" 3060R* White 60" 30" 15" 30"
32" x 48" 3248M White, Bone, Biscuit 48" 32" 16" 24"
32" x 54" 3254M White 54" 32" 16" 27"
32" x 60" 3260M White 60" 32" 16" 30"
34" x 42" 3442M White, Bone, Biscuit 42" 34" 17" 21"
34" x 48" 3448M White, Bone, Biscuit 48" 34" 17" 24"
34" x 54" 3454M White, Bone 54" 34" 17" 27"
34" x 60" 3460M White, Bone, Biscuit 60" 34" 17" 30"
42" x 36" 4236M White 36" 42" 21" 18"
*3060L & 3060R require a drain.
Threshold is on the 36" side.
Color suffix: M for White, BN for Bone and BT for Biscuit (e.g. 3636CM, 3838CBN, 4242BT).
Sectional View
5
1
/
2
"
(139.7)
(114.3)
SUB-FLOOR
(63.5)
2
1
/
2
"
THRESHOLD
DRYWALL
(0.318)
1
/
8
"
GAP
5"
(127)
1
"
(25.4)
2 x 4
STUD
WALL
SQUARE
OPENING
(Metric)
4
1
/
2
"