Technical Specifications

Top View
General: Furnish and install as shown on plans, barrier-free DURABASE
® Shower Floor model
_______ and Entry Ramp model _______ as manufactured by E.L. Mustee & Sons, Inc. Shower
floor to be one-piece, molded fiberglass, using matched metal molds under extreme heat and
pressure. Surface to be slip-resistant design that does not interfere with flow of water. Size: 30"x60".
Shoulder will be not less than 3-1/16" high or less than 1-1/4" wide. Tiling flange will extend not less
than 1" higher than shoulder. Shower floors shall not have curb used in conjunction with 12"x60"
entry ramp per ADA requirements. Drain available on right or left side, offset 81/2"x15". Shall meet
ANSI Specification Z 124.2Aù1990. Color _____ (White, Bone). Install in compliance with local
codes.