Technical Specifications

ona

General: Furnish and install as shown on plans DURABASE® Shower Floor model ______, as

manufactured by E.L. Mustee & Sons, Inc. Floor to be one-piece, molded fiberglass, made with

matched metal molds. Surface to be slip-resistant Starburst

® design that does not interfere with the

flow of water. Size ____ x ____. Shoulder will be no less than 3" high or less than 1" wide. Tiling

flange will extend not less than 1" higher than the threshold which provides an integral molded

water barrier. Threshold will be not less than 4-1/2" high. Molded-in drain and drain seal for

installation of 2" iron DWV (Sch. 40), PVC or ABS sanitary drain pipe. Removable strainer. Color

_____ (White, Bone, Biscuit). Install in compliance with local codes.