Technical Specifications

26F and 26W UTILATWIN
®
Laundry/Utility tubs — Premier
 Sturdy, 1-Piece, Extra Deep Molded Tubs
 Made with DURASTONE® — combination of fiberglass and
crushed stone blended with special resins for extra strength a
durability, marbleized white
 Include Twin Drain Waste connector — joins drain assemblies
assures rapid and uniform discharge of waste water, washers
slip nuts and stoppers provided
 19 Gallon Capacity Per Tub, 13" Deep
 Hooks Up to Standard 1-1/2" P or S Trap
 Accommodate Single or Dual-handle Faucet with 4" or 8"
Centers
 Floor Model Includes Adjustable Leg Levelers for Uneven Floo
 Wall Model Includes Wall Mounting Bracket, Side Supports an
Hardware for Securing Tub to Concrete or Stud Wall
 Smooth Surface, Rust Resistant
 Easy to Assemble and Install
 Preferred by the "Pros"
Code Accepted
utility sinks meet or exceed performance requirements:
 International association of plumbing and mechanical officials
(iapmo
®)— listed file #0820

Warnock hersey
®
(canada) — csa #b45.0 and #b45.5 —
#B125
 American national standards institute (ansi)— specification z 124.6
E. L. Mustee & Sons, Inc.
5431 West 164th Street
Brookpark, OH 44142
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Web: www.mustee.com
General: Furnish and install as shown on plans, UTILATWIN
® Laundry/Utility Tubs model____(26F,
26W), as manufactured by E.L. Mustee & Sons, Inc. Unit shall be one-piece molded construction
using DURASTONE
®, a blend of natural crushed stone and polyester resins molded with matched
metal molds under extreme heat and pressure. Complete drain assembly, twin drain waste
coupling, recessed divider wall between tubs and floor or wall mounting hardware. Shall meet ANSI
Specification Z 124.6.
Model No. Mounting UPC
26F Floor 6 71031 00054 5
26W Wall 6 71031 00055 2
SPECIFICATIONS