Installation Instructions

MUSTEE
HOSPITALITY SINK MODEL 20
Your Hospitality Sink requires a 13 7/8” x 13 7/8” countertop cutout. (preferably with a 7/16” radius in each corner) Refer
to “
ROUGH-IN-DIMENSIONS”. NOTE: The centerline of the drain is located 8 1/2” from the back edge and 7 1/2” from
either side. If you choose, you may use your Hospitallty Slnk as a template for laying out the countertop cutout, refer to
“COUNTER
TOP CUTOUT DETAILS” before doing any drilling or cutting.
CARE AND CLEANING
The surface of your Self-Rimming Hospitallty Slnk may be cleaned with a mlid soap in warm water using a soft cloth. For
stubborn stains use "Soft-Scrub" by Clorox or Lysol "Tub & Tile Cleaner” or a powdered detergent such "Spic-n-Span".
Never use abrasive scouring powder or steel wool pads as they will dull the surface. A periodic coating of a silicone based
marine polish will help retain the fine finish.
ROUGH-IN DIMENSIONS
1. Place Hospitality Sink (1) upside down on countertop in desired location -- hold sink in place and scribe a guide line
1. all around the rim with a pencil.
HINT:
1. If pencil does not mark surface of countertop, you may apply 2" wide masking tape to the approximate area and do the
1.
1. marking directly on the tape surface. Leave tape in place to protect countertop surface during drilling and cutting.
2. Remove Hospitality Sink, measure in 9/16” from guide-line area all around, this will be your cutting line.Drill a 7/8"
1. diameter hole in each corner, insert saber saw blade (fine tooth) into one of the corner holes and cut along, "Cutout 1.
1.
Line". See “COUNTERTOP CUTOUT DETAILS”.
E.L. MUSTEE & SONS, INC.
5431 West 164th Street • Brook Park, Ohio 44142 Sl-163 (04•06)
MUSTEE
HOSPITALITY SINK MODEL 20
“SELF RIMMING
_
COUNTERTOP MOUNTED”
PARTS LIST
E.L. MUSTEE & SONS, INC.
5431 West 164th Street • Brook Park, Ohio 44142 Sl-163 (04•06)
4
* NOTE: FOR REPLACEMENT HARDWARE, ORDER COMPLETE PARTS PACKAGE
PART NO. 10.606 - PACKAGES WILL NOT BE SPLIT FOR INDIVIDUAL PARTS.
PART NUMBER
WHITE BONE
DESCRIPTION
KEY
NO.
1
2
3
4
20.105
*
*
*
20.106
*
*
*
Self Rimming Sink
Mounting Stud (4 Required)
Mounting Plate (4 Required)
Mounting Nut (4 Required)