Technical Specifications

15F and 15W UTILATUB
®
Laundry/Utility tubs — Premier
 Sturdy, 1-Piece, Extra Deep Molded Tub
 Made with Structural Thermoplastic — innovative cellular
molding process makes these white tubs "literally indestructible"
 Built-in Scrub Board
 19 Gallon Capacity, 13" Deep
 Leakproof, Integrally Molded-in Drain with Stopper
 Hooks Up to Standard 1-1/2" P or S Trap
 Accommodate Dual-handle Faucet with 4" Center
 Floor Model Includes Adjustable Leg Levelers for Uneven Floors
 Wall Model Includes Wall Mounting Bracket, Side Supports and
Hardware for Securing Tub to Concrete or Stud Wall
 Smooth Surface, Rust Resistant
 Easy to Assemble and Install
 Preferred by the "Pros"
Code Accepted
utility sinks meet or exceed performance requirements:
 International association of plumbing and mechanical officials
(iapmo
®)— listed file #0635
 Warnock hersey® (canada) — csa #b45.0 and #b45.5 —
#B125
 American national standards institute (ansi)— specification z 124.6
10/8/2004http
E. L. Mustee & Sons, Inc.
5431 West 164th Street
Brookpark, OH 44142
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Web: www.mustee.com
Model No. Mounting UPC
15F Floor 6 71031 00018 7 Download
instructions
15W Wall 6 71031 00019 4 Download
instructions
SPECIFICATIONS
Specifications
General: Furnish and install as shown on plans, UTILATUB
® Laundry/Utility Tub model____(15F,
15W), as manufactured by E.L. Mustee & Sons, Inc. Tub shall be one-piece molded construction
using structural thermoplastic with matched metal molds under extreme heat and pressure. Tub to
include built-in scrub board, integrally molded drain assembly, stopper and floor or wall mounting
hardware. Shall meet ANSI Specification Z 124.6. White color. Weight: 20 lbs.
SPECIFICATIONS